SAProfile_AccessRelay_Phidget_Tab1
Valid Entry Pulse Pattern (SAProfileDetails_ValidPulsePattern)
Enter your Valid Entry Pulse Pattern and Invalid Pulse Pattern value. This can be a single value or a comma-delimited list with no spaces.
The pattern you enter here is dependent upon your selection in the Pulse Pattern is for Green Light, Actuate Relay for Entire Length of the Pulse Pattern.
DeleteAllow Manual Override (SAProfileDetails_AllowManualOverride)
Select this option if you wish to allow clerks to manually open the Access Point when dwelling on the Access Control Monitor program.
De-select this option to disallow manual override.
DeleteInValid Pulse Pattern (Red Light Only) (SAProfileDetails_InValidPulsePattern)
Enter your Invalid Pulse Pattern values. This can be a single value or a comma-delimited list with no spaces.
This is the time value in milliseconds for the red light flashing pattern for invalid entry. For Example: A flashing pattern 2000,1000,2000,1000 would equate to 2 seconds on, 1 second off, 2 seconds on, 1 second off for the red light.
DeleteKeep Open Time Blocks (SAProfileDetails_KeepOpenTimeBlocks)
Select the Facility Time Block Code you wish to link to this profile, if any. If a Time Block is linked to the profile, the Faiclity Keep Open event will keep the facility opened based on the selected Time Block. Facility Time Block Codes are maintained in System Code Management. Type = Facility Time Block.
Delete