The Tree Restriction Update screen allows you to add or update Tree Restriction Codes. These codes are used to classify physical growth limitations/parameters/obstructions for your trees and other flora.
Note: Field names on the screen with red labels* are required by the screen design you are using. Mandatory fields in the default Vermont Systems design are noted where appropriate. Your design and mandatory fields may vary.
From the bottom of the screen…
Click Save to save changes. You will return to the previous screen.
Click Cancel to return to the previous screen without saving changes.
MTTREERESTRICTUpdate_Tab1
Restriction (MTTREERESTRICT_LimitationCode)
If you are creating a new Tree Restriction, then enter your Tree Limitation Code in this field. Codes may be alpha and/or numeric. For Example: POWER. This is a mandatory field for the standard VSI Design. Your Design may vary.
If you are updating an existing Tree Restriction Code then you will not visit this field.
DeleteDescription (MTTREERESTRICT_Description)
Enter a Description for this Tree Restriction Code. For Example: Power Lines.
DeletePrint Message (MTTREERESTRICT_PrintMessage)
Enter text in this field as appropriate to describe the limitation/restriction. This information will print on reports and etc…. For Example: Power lines within 10'. Branches should be pruned to avoid this hazard.
Delete