The Coin Dispenser profile allows you to integrate OrangeCoin coin dispense hardware with your RecTrac point-of-sale program.
Making changes to a profile is an Audited Event. Additionally, Linking, Removing, Purging, and Cloning profiles are also Audited Events.
See Also: Topic Doc - RecTrac Profile Assignments Screen, Hierarchy Guide, and Profile Listing.
See Also: Video - Profile Review
SAProfile_Coin_Dispenser_OrangeCoin_Tab
COM Port (SAProfileDetails_SerialCOMPort)
Select the COM port the hardware is using. Depending on the hardware you're using, this can be a physical COM port or a virtual one.
DeleteBaud Rate (SAProfileDetails_SerialBaud)
Accept the default entry (9600) or select the Baud Rate for the hardware you're using.
DeleteParity (SAProfileDetails_SerialParity)
Accept the default entry (None) or select the Parity for the hardware you're using.
DeleteWord Length (SAProfileDetails_SerialWordLength)
Accept the default entry (Eight) or select the Word Length for the hardware you're using.
DeleteStop Bits (SAProfileDetails_SerialStopBits)
Accept the default entry (One) select the Stop Bits for the hardware you're using.
DeleteHardware CTL (SAProfileDetails_SerialHardwareCTL)
Select whether you wish to Enable or Disable Hardware Control (CTL). Hardware CTL is often referred to as Handshaking."
Note: If running Background Visit Processing via this profile your selection here must be Disable.