3.1 How to Change Function of Keystroke in Visit Processing
Problem
Is there a way to change the default function of the [Enter] keystroke in Visit Processing from Name Lookup to Pass Number Lookup? This would be very helpful if you're doing manual visit processing by Pass Number.
Solution
The basic steps to do this assume you're already set up for Custom Screen designs. These steps also assume you are running Visit Processing in Attended Mode only. You cannot change the default function of the [Enter] key if using any mode other than Attended.
1 Make a Custom Processing Screen for VisitProcessingArea2
a) Go to Processing Screen Management > Add VisitProcessingMain > Click Done.
b) You will be returned to the Processing Screen Management main DataGrid, and the VisitProcssingArea screens will now be added)
c) Highlight/Select VisitProcessingArea2 and click Change.
2 From the Fields on Screen (middle) panel, Expand Tab1
3 Expand Group 1
4 Select Process Swipe (Button) and click Advanced Field Parameters in the Field Parameters (right-hand) panel.
5 Edit the Click.Data field:
From: Routine=GlobalSales&Action=AddToCart&ProcessSwipe=full
To: Routine=GlobalSales&Action=AddToCart&ProcessSwipe=pass
6 Save your changes.
7 Launch Visit Processing. Enter a valid pass number and press the [Enter] key on your keyboard.