The Criteria Group contains filters specific to the report you are running.
ReportOptionsPMTrendAnalysis_Tab1
Pass Member Status (ReportOptionsPMTrendAnalysis_RecordStatus)
Select the pass statuses by which you want to filter the report.
Note: The Pass Trend Analysis report displays variances in Pass Registrations Renewals and Visits with associated fees over up to five (5) user-defined date ranges allowing you to view trends or patterns in revenue generated from your Pass Management program. Trend Analysis reports are based on fees paid only (net revenue) and do not take refunds or other expenses into account.
Trend Print Options (ReportOptionsPMTrendAnalysis_TrendPrintOptions)
Choose one or more of the following Trend Print Options. This is a mandatory field in the Vermont Systems default design. Your design may vary.
- Detail Trends - Select this option if you would like to see subtotals for net revenue from new and renewed memberships and visits.
- Pass Category Trends - Select this option if you would like to see subtotals for net revenue from new and renewed memberships and visits by Category
- Pass Type Trends - Select this option if you would like to see subtotals for net revenue from new and renewed memberships and visits by Type.
Note: The Pass Trend Analysis report displays variances in Pass Registrations Renewals and Visits with associated fees over up to five (5) user-defined date ranges allowing you to view trends or patterns in revenue generated from your Pass Management program. Trend Analysis reports are based on fees paid only (net revenue) and do not take refunds or other expenses into account.
Date Range 1 Begin (ReportOptionsPMTrendAnalysis_DateRange1Begin)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 1 End (ReportOptionsPMTrendAnalysis_DateRange1End)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 2 Begin (ReportOptionsPMTrendAnalysis_DateRange2Begin)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 2 End (ReportOptionsPMTrendAnalysis_DateRange2End)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 3 Begin (ReportOptionsPMTrendAnalysis_DateRange3Begin)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 3 End (ReportOptionsPMTrendAnalysis_DateRange3End)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 4 Begin (ReportOptionsPMTrendAnalysis_DateRange4Begin)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 4 End (ReportOptionsPMTrendAnalysis_DateRange4End)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 5 Begin (ReportOptionsPMTrendAnalysis_DateRange5Begin)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.
Date Range 5 End (ReportOptionsPMTrendAnalysis_DateRange5End)
Enter up to five (5) date ranges for this report.
For each of the five (5) you choose to use, select your Begin/End Date date range for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
For more accurate trend analysis Vermont Systems recommends entering date ranges in non-overlapping blocks (i.e. month to month season to season year to year etc.).
Note: The report uses Membership Dates (new memberships and renewals) and Visit dates on the report output. So if "today" is May 15 20xx and a patron buys a summer pass that is valid 01 June-15 September 20xx then the membership will be reflected on the report only if one of your date ranges includes 01 June 20xx.
Visits will be reflected on the report output provided the pass was swiped within your date range.