FastTrac: StarTSP Install
Session 1: Installing a Star TSP 100 onto your workstation
Summary
Join Seth McMullen in this first of three part mini series discussing Star TSP 100 Printers within RecTrac. In the first installment, Seth goes over how to install a Star Printer to your workstation. Once installed and a Test Print within Windows is able to be completed, you're ready to move onto the second video in the series!
Video
Transcript
Seth McMullen 0:00
Welcome to Fast Track. This video covers a Star TSP 100 printer install. To do this, I'll need a star printer, a power cable, a USB cable admin login permissions and a Windows RecTrac workstation. please navigate to stars website and download the driver. Right Click Run as admin when installing the driver. Accept all defaults for the install. Once the driver is installed, we will power the printer. Install the paper and connect to the workstation. Plug in each cable to the printer. Turn the printer right side up. power the printer and install the paper as shown. Closing the top should feed and cut the paper. Next plug in the USB to the workstation and wait for Windows to finish finding the driver. Navigate to Devices and Printers as shown. Locate the listed star printer and go to Printer Properties. Performing a test print proves a successful install. This completes the Windows Setup portion RecTrac will use the Windows printer name listed and VIC which will be covered in another video. Thank you for watching
Delete