SAProfile_ERange_Select_PI_Tab1
Host Name or IP Address (SAProfileDetails_SelectPiServerIP)
Enter the Range Servant Host Name or its IP Address in this field. Range Servant will supply you with this information.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
Note: Step-by-step instructions for set up and use of this interface are in the Header Help. Click the "?" Help icon located on the upper right-hand corner of this browser and follow the link to Topic Doc - Range Ball Solutions for RecTrac
Server Port Number (SAProfileDetails_SelectPiServerPort)
Enter the Port Number as given to you by Range Servant. If no specific port was provided the default value of 443 should not be changed.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
DeletePasskey (SAProfileDetails_Passkey)
Enter the Passkey as given to you by Range Servant.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
DeleteTenant ID (SAProfileDetails_TenantID)
Enter the Tenant ID as given to you by Range Servant.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
DeleteUsername (SAProfileDetails_Username)
Enter the Username as given to you by Range Servant.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
DeleteVendor Role (SAProfileDetails_VendorRole)
Enter the Vendor Role as given to you by Range Servant.
This is a mandatory field for the default Vermont Systems design. Your Design and setup may vary.
DeletePIN Font Size (SAProfileDetails_PINFontSize)
Accept the defualt value in this field or expand the Drop-down list to select the font size for the PIN. The value you select will be the font size for the PIN when printed on receipts. Select 10" to have the PIN print in the same size as the standard receipt font or go smaller or larger as desired.
DeleteResponse Time Out (SAProfileDetails_ResponseTimeOut)
Enter a value in this field. The value is a timeout threshold in seconds that the system will wait for a response from Range Servant when processing a transaction. If a response from Range Servant is not received within the time limit set, then the transaction will not process.
Delete