The POS Ticket Setup Reports offer a wide range of reporting for your POS Tickets in RecTrac. Report outputs include, but are not limited to: Financial Reports, Statistical Reports, Setup Listings, Status Reports, and Ticket Reports.
RecTrac Process and Reporting screens offer numerous fields and widgets that allow you to filter the data for which your process or report is being run. RecTrac Widgets provides definitions and examples to show you how these work.
Buttons on the screen…
Core Criteria
Ticket Codes (PSTicketMain_TicketCode_DataGrid)
The Ticket Code DataGrid displays all ticket codes in your database based on the DataGrid filters being used and your Permissions.
Highlight/select individual ticket codes, as needed, from the DataGrid. Multiple selection is allowed.
OR
Select the Use Ticket Code Range option.
THEN
Input the range of ticket codes you wish to include.
Make selections in the DataGrid or use a Ticket Code Range or Both. Leaving the DataGrid blank and the Use Range option deselected will result in no ticket codes being selected.
Click here for a full description of RecTrac DataGrids.
DeleteUse Ticket Range (PSTicketMain_TicketCode_UseRange)
This field appears in numerous programs. Its functionality may vary.
Select this option to limit your selection to a range of POS Tickets.
THEN
Enter the range of POS Ticket Codes.
OR
Leave this option deselected to skip the POS Ticket Code Range check and make selections from the DataGrid if applicable.
- If there is a DataGrid for this program - In instances where you have a DataGrid and corresponding range a selection in one or the other (or both) is required. Selecting nothing from the DataGrid and nothing from the Range yields a blank report or process.
- If there is not a DataGrid for this program - In instances where you don't have a DataGrid a selection here is not required. Leaving this option deselected skips this filter and results in all Codes being included.
Ticket Status (PSTicketMain_RecordStatus_ComboBox)
Select the Ticket Status(es) you wish to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Active
- Inactive
Begin Ticket (PSTicketMain_TicketCode_Begin)
This field is applicable only if you opt to Use POS Ticket Range.
Select the beginning and ending POS Ticket Codes for their respective fields.
DeleteEnd Ticket (PSTicketMain_TicketCode_End)
This field is applicable only if you opt to Use POS Ticket Range.
Select the beginning and ending POS Ticket Codes for their respective fields.
DeleteTicket Wildcard (PSTicketMain_TicketCode_Equals)
Select the Ticket Code you wish to use as a base for your wildcard.
THEN
Choose your Wildcard Equals Option, if applicable.
See also: RecTrac Wildcarding.
DeleteWildcard Option (PSTicketMain_TicketCode_Equals_Option)
Select your Wildcard Option for this process:
- Equals - The process will return a list of all records that equal the value entered. This must be an exact match. For Example: If this was a list of Family Members, entering 'Grace Somersby' would find 'Grace Somersby' because it is an exact match, but it would NOT find 'Grace J. Somersby' because it is not an exact match.
Note: When running Reports you can use a comma-delimited list (with no spaces) in the corresponding Wildcard field when your Wildcard Option is Equals. This applies to Reports only. For Example: Entering "48116 5851 88003" in a Zip Code Wildcard field on a Report and using the Equals Option would yield results from those three separate Zip Codes.
- Begins - The process will return a list of all records that begin with the value entered. Wildcarding asterisks/periods are not needed. For Example: If this was a list of Family Members entering 'Gr' would find all members whose name begins with 'Gr' such as Grace Somersby but it would NOT find Ginny Weasley because her name begins with 'Gi.'
- Ends - The process will return a list of all records that end with the value entered. Wildcarding asterisks/periods are not needed. For Example: If this was a list of Family Members entering 'by' would find all members whose name ends with 'by' such as Grace Somersby but it would NOT find Sam McGee because his name ends with 'ee.'
- Matches - The process will return a list of all records where a value match can be found. Wildcarding and asterisks/periods must be used. For Example: If this was a list of Family Members entering '*om*' (asterisks must be included) would find Grace Somersby and Tom Sawyer because "om" appears in both names but it would NOT find Felicity Lemon because "om" does not appear anywhere in her name.
Note: See also: RecTrac Wildcarding.
Use Event Date Range (PSTicketMain_IncludeEventDate_UseRange)
Select this option to filter the output by Event Date Range.
THEN
Use the Date Select fields to identify your range.
OR
Leave this option deselected to skip this filter.
Begin Event Date (PSTicketMain_IncludeEventDate_Begin)
This field is applicable only if you opt to Use Event Date Range.
Select your begin/end options for this process.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteEnd Event Date (PSTicketMain_IncludeEventDate_End)
This field is applicable only if you opt to Use Event Date Range.
Select your begin/end options for this process.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteUse Event Time Range (PSTicketMain_IncludeEventTime_UseRange)
Select this option to filter the report output by Event Time Range.
THEN
Use the Time Select fields to identify your range.
OR
Leave this option de-selected to skip this filter.
Begin Event Time (PSTicketMain_IncludeEventTime_Begin)
This field is applicable only if you opt to Use Event Time Range.
Select your begin/end time options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual time you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteEnd Event Time (PSTicketMain_IncludeEventTime_End)
This field is applicable only if you opt to Use Event Time Range.
Select your begin/end time options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual time you wish to select.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteTicket Block Option (PSTicketMain_BlockOption_ComboBox)
Select the Ticket Block Option(s) you wish to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Non Serialized - The Serialized? option is not enabled.
- Serialized - The Serialized option is enabled.
Ticket Report Tag (PSTicketMain_ReportTag_ComboBox)
Select the Report Tags by which you wish to filter. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
Report Tags are maintained in System Code Maintenance Code Type = Report Tag. They are linked in File Management for the module you are working with. For example Section Report Tags are linked in Section Management Facility Report Tags are linked in Facility Management etc.
DeleteTicket Category (PSTicketMain_Category_ComboBox)
Select the Category Code(s) by which you wish to filter. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
Category Codes are maintained in System Code Management Code Type = Category. They are linked in File Management for the module you are working with. For Example: Activity Categories are linked in Activity Management Facility Categories are linked in Facility Management etc.
DeleteTicket Type (PSTicketMain_TypeCode_ComboBox)
Select the Type Code(s) by which you wish to filter. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
Type Codes are maintained in System Code Management Code Type = Type. They are linked in File Management for the module you are working with. For Example: Activity Types are linked in Activity Management Facility Types are linked in Facility Management etc.
DeleteTicket SubType (PSTicketMain_SubType_ComboBox)
Select the SubType Code(s) by which you wish to filter. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
SubType Codes are maintained in System Code Management Code Type = Type • SubTypes. They are linked in File Management for the module you are working with. For Example: Activity SubTypes are linked in Activity Management Facility SubTypes are linked in Facility Management etc.
DeletePrimary Vendor (PSTicketMain_VendorIDCode_ComboBox)
Select the vendor(s) you wish to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
Note: The Combo Box populates dynamically based on the vendor records you have created in Vendor Management.
Detail Criteria
Site Code (PSTicketMain_SiteCode_Picklist)
Select the Site Code(s) by which you want to filter the report. Multiple selection is allowed.
OR
Leave this field blank to skip this filter.
Site Area (PSTicketMain_SiteArea_Picklist)
Select the Site Area(s) by which you want to filter the report. Multiple selection is allowed.
OR
Leave this field blank to skip this filter.
Site Category (PSTicketMain_SiteCategory_Picklist)
Select the Site Category/Categories by which you want to filter the report. Multiple selection is allowed.
OR
Leave this field blank to skip this filter.
Site Group (SASite_SiteGroup_PickList)
Select the Site Group(s) by which you want to filter the report. Multiple selection is allowed.
OR
Leave this field blank to skip this filter.
Site Type (SASite_SiteType_Picklist)
Select the Site Type(s) by which you want to filter the report. Multiple selection is allowed.
OR
Leave this field blank to skip this filter.
Use Shipping Code Range (PSTicketMain_PSShippingCode_UseRange)
Select this option to filter your report by Shipping Code Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Shipping Code (PSTicketMain_PSShippingCode_Begin)
This field is applicable only if you opt to Use Shipping Code Range.
Input your beginnng and endng range for this report.
DeleteEnd Shipping Code (PSTicketMain_PSShippingCode_End)
This field is applicable only if you opt to Use Shipping Code Range.
Input your beginning and ending range for this report.
DeleteUse Reorder Point Range (PSTicketMain_ReorderPoint_UseRange)
Select this option to filter your report by Reorder Point Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Reorder Point (PSTicketMain_ReorderPoint_Begin)
This field is applicable only if you opt to Use Reorder Point Range.
Input your range for this report.
DeleteEnd Reorder Point (PSTicketMain_ReorderPoint_End)
This field is applicable only if you opt to Use Reorder Point Range.
Input your range for this report.
DeleteUPC Code (PSTicketMain_UPCCode_Equals)
Enter a wildcard value, if desired.
THEN
Select a Wildcard Option. Depending on your selection, wildcard asterisks/periods may be required.
OR
Leave this field blank to skip this filter.
WildCard Option (PSTicketMain_UPCCode_Equals_Option)
Select your Wildcard Option for this process:
- Equals - The process will return a list of all records that equal the value entered. This must be an exact match. For Example: If this was a list of Family Members, entering 'Grace Somersby' would find 'Grace Somersby' because it is an exact match, but it would NOT find 'Grace J. Somersby' because it is not an exact match.
Note: When running Reports you can use a comma-delimited list (with no spaces) in the corresponding Wildcard field when your Wildcard Option is Equals. This applies to Reports only. For Example: Entering "48116 5851 88003" in a Zip Code Wildcard field on a Report and using the Equals Option would yield results from those three separate Zip Codes.
- Begins - The process will return a list of all records that begin with the value entered. Wildcarding asterisks/periods are not needed. For Example: If this was a list of Family Members entering 'Gr' would find all members whose name begins with 'Gr' such as Grace Somersby but it would NOT find Ginny Weasley because her name begins with 'Gi.'
- Ends - The process will return a list of all records that end with the value entered. Wildcarding asterisks/periods are not needed. For Example: If this was a list of Family Members entering 'by' would find all members whose name ends with 'by' such as Grace Somersby but it would NOT find Sam McGee because his name ends with 'ee.'
- Matches - The process will return a list of all records where a value match can be found. Wildcarding and asterisks/periods must be used. For Example: If this was a list of Family Members entering '*om*' (asterisks must be included) would find Grace Somersby and Tom Sawyer because "om" appears in both names but it would NOT find Felicity Lemon because "om" does not appear anywhere in her name.
Note: See also: RecTrac Wildcarding.
Allow Individual Ticket Selection (PSTicketMain_AllowIndividualTicketSelection_ComboBox)
Select the Allow Individual Ticket Selection option(s) you wish to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Yes - The Assign Tickets to Clerk? option is enabled.
- No - The Assign Tickets to Clerk? option is disabled.
Print Ticket Code On Receipt (PSTicketMain_PrintTicketCodeOnReceipt_ComboBox)
Select the Print Ticket Code on Receipt option(s) you want to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Yes - The Print Ticket Code on Receipt option is enabled on the POS ticket.
- No - The Print Ticket Code on Receipt option is disabled on the POS ticket.
Display On Web (PSTicketMain_DisplayOnWeb_ComboBox)
Select the Display on Web option(s) you want to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Yes - The Display on Web field is set to Yes" on the POS ticket.
- No - The Display on Web field is set to "No" on the POS ticket.
Web Event (PSTicketMain_WebEvent_ComboBox)
Select the Web Event option(s) you wish to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Yes - The Web Event option is enabled on the POS Ticket.
- No - The Web Event option is disabled on the POS Ticket.
Hide Ticket On Web Listing (PSTicketMain_HideTicketOnWebListing_ComboBox)
Select the Hide Ticket on WebTrac Listing option(s) you want to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Yes - The Hide Ticket on WebTrac Listing option is enabled on the POS Ticket.
- No - The Hide Ticket on WebTrac Listing option is disabled on the POS Ticket.
Web Print Option (PSTicketMain_WebPrintOption_ComboBox)
Select the WeTrac Print Option(s) you want to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Online - The WebTrac Print Option field is set to Online" on the POS Ticket.
- In Office (Batch) - The Display on Web field is set to "In Office (Batch)" on the POS Ticket.
Use Block Description Range (PSTicketBlock_Description_UseRange)
Select this option to filter your report by Ticket Block Description Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Ticket Blocks do not have Codes. This filter reads the Description field for the Ticket Block. Ticket Blocks are maintained on the Ticket Blocks tab of Pos Ticket Update.
DeleteRecord Status (PSTicketBlock_RecordStatus_ComboBox)
Select the Ticket Block Status(es) you want to include in your output. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Active
- Inactive
Begin Block Description (PSTicketBlock_Description_Begin)
If opting to Use Block Description Range, enter the beginning and ending range of ticket block descriptions you want to include for this program,
Ticket blocks do not have codes. This filter reads the Description field for the ticket block. Ticket blocks are maintained on the Ticket Blocks tab of Pos Ticket Update.
DeleteEnd Block Description (PSTicketBlock_Description_End)
If opting to Use Block Description Range, enter the beginning and ending range of ticket block descriptions you want to include for this program,
Ticket blocks do not have codes. This filter reads the Description field for the ticket block. Ticket blocks are maintained on the Ticket Blocks tab of Pos Ticket Update.
DeleteUse Ticket Number Range (PSTicketBlock_TicketNumber_UseRange)
Select this option to filter your report by Ticket Number Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Ticket Number (PSTicketBlock_TicketNumber_Begin)
This field is applicable only if you opt to Use Ticket Number Range.
Input your beginning and ending ticket range for this report.
DeleteEnd Ticket Number (PSTicketBlock_TicketNumber_End)
This field is applicable only if you opt to Use Ticket Number Range.
Input your beginning and ending ticket range for this report.
DeleteUse Void After Date Range (PSTicketBlock_VoidAfterDate_UseRange)
Select this option to filter the report output by Void After Date Range.
THEN
Use the Date Select fields to identify your beginning and ending date range.
OR
Leave this option deselected to skip this filter.
Begin Void After Date (PSTicketBlock_VoidAfterDate_Begin)
This field is applicable only if you opt to Use Void After Date Range.
Select your begin and end options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select. POS tickets with an event date within the date range selected will be included in your output.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteEnd Void After Date (PSTicketBlock_VoidAfterDate_End)
This field is applicable only if you opt to Use Void After Date Range.
Select your begin and end options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select. POS tickets with an event date within the date range selected will be included in your output.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteUse Ticket Start Date Range in Fee/Payment Calculations (PSTicketMain_DetailBeginDate_UseRange)
This field is applicable for the Bottom Line Report only.
Select this option to include payments made toward the POS tickets during the date range entered.
THEN
Use the Date Select fields to identify your beginning and ending date range.
OR
Leave this option deselected to skip this filter.
The date range you enter should be inclusive of all dates on which you take payments for the POS ticket(s) on which you are reporting. For example if your ticked event runs from 01 April - 14 April but your purchase window is 01 March - 10 April then you would set this date range to 01 March - <xx/xx/xxxx> where the ending date is the date on which you stop taking payments for the POS ticket(s). If you allow late payments then the ending date feasibly would be the day you Archive tickets in preparation for the next year's/season's purchase period.
DeleteBegin Ticket Start Date (PSTicketMain_DetailBeginDate_Begin)
This field is applicable only if you opt to Use Section Date Range in Free/Payment Calculations.
Select your Begin/End Date options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select. Payments made toward the POS tickets during the date range selected will be included in your output.
The date range you enter should be inclusive of all dates on which you take payments for the POS ticket(s) on which you are reporting. For example if your ticked event runs from 01 April - 14 April but your purchase window is 01 March - 10 April then you would set this date range to 01 March - <xx/xx/xxxx> where the ending date is the date on which you stop taking payments for the POS ticket(s). If you allow late payments then the ending date feasibly would be the day you Archive tickets in preparation for the next year's/season's purchase period.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteEnd Ticket Start Date (PSTicketMain_DetailBeginDate_End)
This field is applicable only if you opt to Use Section Date Range in Free/Payment Calculations.
Select your Begin/End Date options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual date you wish to select. Payments made toward the POS tickets during the date range selected will be included in your output.
The date range you enter should be inclusive of all dates on which you take payments for the POS ticket(s) on which you are reporting. For example if your ticked event runs from 01 April - 14 April but your purchase window is 01 March - 10 April then you would set this date range to 01 March - <xx/xx/xxxx> where the ending date is the date on which you stop taking payments for the POS ticket(s). If you allow late payments then the ending date feasibly would be the day you Archive tickets in preparation for the next year's/season's purchase period.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteUse Misc Inc/Exp Post Date in Misc Inc/Exp Calculation (PSTicketMain_MiscIncomeExpenseDate_UseRange)
This field is applicable for the Bottom Line Report only.
Select this option to include Miscellaneous Income/Expense postings made toward the POS tickets on which you are reporting during the date range entered.
THEN
Use the Date Select fields to identify your range.
OR
Leave this option deselected to skip this filter.
The date range you enter should be inclusive of all dates on which you made any Income/Expense posting for the POS ticket(s) on which you are reporting. For example if your ticketed event runs from 15 May - 15 July but you received a subsidy reimbursement from the State on 08 August then you would set your date range to 15 May - 08 August to ensure the Miscellaneous Income Posting for the subsidy reimburse gets included.
DeleteBegin Misc Inc/Exp Posting Date (PSTicketMain_MiscIncomeExpenseDate_Begin)
This field is applicable only if you opt to Use Misc Inc/Exp Post Date Range in Fee/Payment Calculations.
Select your begin/end options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual dates you wish to select. Miscellaneous Income/Expense Postings made toward the POS Tickets during the date range selected will be included in your output.
The date range you enter should be inclusive of all dates on which you made any Income/Expense posting for the POS ticket(s) on which you are reporting. For example if your ticketed event runs from 15 May - 15 July but you received a subsidy reimbursement from the State on 08 August then you would set your date range to 15 May - 08 August to ensure the Miscellaneous Income Posting for the subsidy reimburse gets included.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteEnd Misc Inc/Exp Posting Date (PsTicketMain_MiscIncomeExpenseDate_End)
This field is applicable only if you opt to Use Misc Inc/Exp Post Date Range in Fee/Payment Calculations.
Select your begin/end options for this report.
THEN
Take appropriate action in the right-hand column to specify the actual dates you wish to select. Miscellaneous Income/Expense Postings made toward the POS Tickets during the date range selected will be included in your output.
The date range you enter should be inclusive of all dates on which you made any Income/Expense posting for the POS ticket(s) on which you are reporting. For example if your ticketed event runs from 15 May - 15 July but you received a subsidy reimbursement from the State on 08 August then you would set your date range to 15 May - 08 August to ensure the Miscellaneous Income Posting for the subsidy reimburse gets included.
Refer to RecTrac Date/Time Select Fields for a listing of selection definitions and examples.
DeleteUse Serial Number Range (PSSerialTicket_SerialNumber_UseRange)
Select this option to filter your report by Serial Number Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Record Status (PSSerialTicket_RecordStatus_ComboBox)
Select the Serial Ticket Status(es) you want to include. Multiple selection is allowed.
OR
Leave this field at (0) Selected to skip this filter.
- Active- Active single serial tickets.
- Block Inactive- Serial tickets where the block is set to 'Inactive.'
- Inactive - Inactive single serial rickets.
- Sold - Single serial tickets that have been sold.
- Lost - Single serial tickets reported as 'Lost.'
- Hold - Single serial tickets that have been placed on hold.
- Vendor Return - Single serial tickets that have been returned to the vendor.
- In Process - Single serial tickets flagged as 'In Process,' meaning they are in a shopping cart.
Begin Serial Number (PSSerialTicket_SerialNumber_Begin)
This field is applicable only if you opt to Use Serial Number Range.
Input your beginning and ending serial number range for this report.
DeleteEnd Serial Number (PSSerialTicket_SerialNumber_End)
This field is applicable only if you opt to Use Serial Number Range.
Input your beginning and ending serial number range for this report.
DeleteUse Area Range (PSSerialTicket_Area_UseRange)
Select this option to filter your report by Serial Ticket Area Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Area (PSSerialTicket_Area_Begin)
This field is applicable only if you opt to Use Area Range.
Input your beginning and ending area range for this report.
DeleteEnd Area (PSSerialTicket_Area_End)
This field is applicable only if you opt to Use Area Range.
Input your beginning and ending area range for this report.
DeleteUse Section Range (PSSerialTicket_Section_UseRange)
Select this option to filter your report by Serial Ticket Section Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Section (PSSerialTicket_Section_Begin)
This field is applicable only if you opt to Use Section Range.
Input your beginning and ending section number range for this report.
DeleteEnd Section (PSSerialTicket_Section_End)
This field is applicable only if you opt to Use Section Range.
Input your beginning and ending section number range for this report.
DeleteUse Seat Row Range (PSSerialTicket_SeatRow_UseRange)
Select this option to filter your report by Serial Ticket Seat Row Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Seat Row (PSSerialTicket_SeatRow_Begin)
This field is applicable only if you opt to Use Seat Row Range.
Input your beginning and ending seat row range for this report.
DeleteEnd Seat Row (PSSerialTicket_SeatRow_End)
This field is applicable only if you opt to Use Seat Row Range.
Input your beginning and ending seat row range for this report.
DeleteUse Seat Range (PSSerialTicket_Seat_UseRange)
Select this option to filter your report by Serial Ticket Seat Range.
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Seat (PSSerialTicket_Seat_Begin)
This field is applicable only if you opt to Use Seat Range.
Input your beginning and ending seat range for this report.
DeleteEnd Seat (PSSerialTicket_Seat_End)
This field is applicable only if you opt to Use Seat Range.
Input your beginning and ending seat range for this report.
DeleteUse User Name Range (PSSerialTicket_UserName_UseRange)
Select this option to filter your report by User ID Range (who is assigned to the serial tickets).
THEN
Input the range.
OR
Leave this option deselected to skip this filter.
Begin Assigned To (PSSerialTicket_UserName_Begin)
This field is applicable only if you opt to Use User Name Range.
Input your beginning and ending user ID range for this report.
DeleteEnd Assigned To (PSSerialTicket_UserName_End)
This field is applicable only if you opt to Use User Name Range.
Input your beginning and ending user ID range for this report.
Delete