3.1 How to setup Sigma ID Card Printer from Entrust
RecTrac 3.1.10.10.00
Table of Contents
Problem
How do I setup the Sigma Card Printer in 3.1 RecTrac to print ID and membership cards?
Solution
The configuration in RecTrac is simple! Once you have installed the printer to windows, in RecTrac you will need to create a new printer profile using the Windows printer name, then link it as a pass printer
Supporting Documents
Sigma-DS2-Direct-to-Card-Printer-Data_Sheet.pdf
528169-001EN_B_DS1_DS2_DS3_UserReferenceGuide_VIEW.pdf
528114-001D_Printer_Dashboard.pdf
528062-001B_DS1_DS2_DS3_InstAdminGd.pdf
528060-001B_DS1_DS2_DS3_UG pdf.pdf
528030-001C_SigmaPrinter_QIG_VIEW.pdf
Steps For Solution
- Install the printer on the windows workstation using the provided resources and driver
- Go to Profile Assignments
- Click Add
- Set Profile Type to Printer
- Give your new Printer Profile an identifiable Profile Code (i.e. Sigma Printer)
- Click Create
- Input the Windows Printer Path/Name
- Click Save
- Assign the new Printer Profile to the workstation where the printer will reside by draging the profile from the right column and droping it under the workstation in the center column